LG / GOLDSTAR DA3520
Instrukcja Serwisowa

GUIDE UP/DOWN GEAR LOADING

(L6) GEAR PULLEY (L4) (L6)

BELT LOADING PWB ASSEMBLY LOADING (L6) (S5) BASE MAIN (A) (L5) GUIDE UP/DOWN (C) (B) Fig.(C) (A)

BASE MAIN (H1)

(S4)

FRAME ASSEMBLY UP/DOWN

Fig.(5) GUIDE UP/DOWN GUIDE UP/DOWN

Fig. 4-4

5. Frame Assembly Up/Down
[Note] Put the Base Main face down(Bottom Side) 1) Release the Screw(S4) 2) Unlock the Locking Tab(L3) in direction of arrow and then lift up the Frame Assembly Up/Down to separate it from the Base Main. [Note] � When reassembling move the Guide Up/Down in direction of arrow(C) until it is positioned as Fig.(C). � When reassembling insert (A) portion of the Frame Assembly Up/Down in the (B) portion of the Guide Up/Down as Fig.(B)

8. Gear Loading (Fig. 4-4) 9. Guide Up/Down (Fig. 4-4)
1) Move the Guide Up/Down in direction of arrow(A) as Fig.(A) 2) Push the Locking Tab(L5) down and then lift up the Guide Up/Down to separate it from the Base Main. [Note] When reassembling place the Guide Up/Down as Fig.(C) and move it in direction arrow(B) until it is locked by the Locking Tab(L5). And confirm the Guide Up/Down as Fig.(A)

10. PWB Assembly Loading
[Note] Put the Base Main face down(Bottom Side) 1) Release 2 Screws(S5) 2) Unkool the Loading Motor Connector (C2) from the Hook (H1) on the Base Main. 3) Unlock 2 Locking Tabs(L6) and separate the PWB Assembly Loading from the Base Main.

6. Belt Loading(Fig. 4-4)
[Note] Put the Base Assembly Main on original position (Top Side)

7. Gear pulley (Fig. 4-4)
1) Unlock the Locking Tab(L4) in direction of arrow(B) and then separate the Gear Pulley from the Base Main.

11. Base Main(Fig. 4-4)

- 4-4 -